A Fool-Proof Formula for Easy Home Alarm Systems Installation

The best thing about modern home alarm systems is that you can install them yourself or hire a professional. A majority of the DIY home alarm systems from porch.com are wireless and does not require any technical or drilling expertise.

DIY alarm installations are perfect for renters as well as homeowners who are considering moving soon. In this article, we look at an easy formula for installing home alarm systems.

Key components of a DIY Home Alarm System

Home alarm systems vary from one company to the next, and they range from basic to complex and robust systems. The DIY installation allows for complete customization of your home security with a majority of the companies selling the system in pieces.

A basic DIY home alarm system today consists of the following components:

white surveillance camera hanging on wall

Control Panel with a Keypad

The main keypad is the center of every home alarm system. The integrated keypad is used for arming and disarming the security system. However, there are also complex and advanced keypads that give you more control, such as programming the alarm settings.


The basic home alarm system has sensors for the doors and windows. They will trigger the alarm when the window or door is opened. Typically, the system provider will allow for at least 45 seconds for the alarm to be disarmed before sending a message to the local authorities.

More complex alarm systems will have fire sensors, glass shatter sensors, flood sensors, freeze sensor, and more. The number of sensors for an alarm system will depend on the number of windows and doors in your home.

Motion Detectors

Basically, motion detectors are placed in corners, and they will turn on the lights or trigger the alarm when there is an intruder in your compound or room. You can also pair up motion detectors with surveillance cameras, and they begin recording when movement is detected.

Easy Home Alarm System Installation

DIY alarm systems are easy to install, but some people find the task more grueling than others do. Here is a simple formula for installing home alarm systems yourself.

Installing the Wireless Home Security Panel

The control panel should be installed near the main entry or exit way, preferably at the front door. This allows you to disarm it quickly when you enter and arm it when you leave.

You will need a hammer for this job and nail to install the panel. If you are not at liberty to put homes in a wall, you can use a removable double adhesive tape to secure the panel.

Placing Sensors

Your home alarm system may include basic window and door sensors as well as motion detectors. The sensors come with a peel and stick backing that holds them in place, and can be moved when you are moving houses.

Placing of the sensors can be tricky, and you need to follow the guideline as indicated in the instruction manual.

open window glass

Testing the System

Alarm system instructions manual will have the procedure for testing the alarm. It is at this time that you will know if the system is worth your time or you should change it.

In case you run into problems installing the home alarm system, you should call the customer care representative for support.

DIY Home Alarm System Installation Is Not For Everyone

Not all wireless systems are this easy to fix especially if you do not have any technical experience. Besides, not every homeowner has the time or the technical capability. The very complex alarm systems come equipped with additional sensors such as carbon dioxide sensors, fire, and smoke sensors, among others.

Besides DIY systems offer advanced installation options unlike the traditional alarm systems. If components in a DIY alarm system fail, you are responsible for replacing or repairing it. For this reason, many homeowners and renters would prefer to get a professional to install the system.

There are many reasons for this, including:

  • Getting replacement parts and parts repairing for free
  • Professional monitoring

A section of the homeowners will refuse to DIY install the alarm system because they do not want to get it wrong. However, a professional will be able to do a clean and effective job of the installation.

This will remove the need for tearing down the alarm system and starting all over again. On top of this, there is the risk of failing to install the system properly, and it could leave you unprotected.


DIY alarm systems are easy to figure out and install, for most people that is, and we hope that the easy formula will help you get it right. With that said, a sure proof way of installing the system is to start by reading the interactions manual.

Ensure that all the components are included in the box, then start the installation with the simple formula outlined above.

Add Comment