Preventing Flooded Basement with a Sump Pump

A home, wherever it may be located, is an important investment for every family. A home is where your family seeks refuge after a tiresome day at work or school. It is therefore important for homeowners to protect their homes from harsh elements such as fire and flooding.

SumpPump.jpg

A flooded basement may be a regular occurrence for homes that are located in high water table areas. The ground surrounding your home may easily get saturated even if there is little rainfall. This saturated condition of the ground will cause excess water to runoff along with lawns and may end up entering your basement. Likewise, flooded basements are also common for homes that are located near bodies of water that tend to swell up during heavy downpours. Fortunately, you can prevent your basement from getting flooded by installing a sump pit with a submersible pump which you can purchase from Toolkwip Pumps.

What is a Sump Pit? A sump pit is an installation in your basement that will automatically pump out any water entering the area. It is made of a pit which is three feet in depth and one and a half feed in diameter. Inside the pit is a submersible pump that automatically turns on when collected water reaches a specific height. The sump pump will pump out the water through a system of pipes away from the house. Installing a sump pit in your basement will give you the following benefits.

Flood Prevention. A lot of reasons may cause flooding in a basement. If you have a below-ground basement, saturated groundwater may seep through cracks in the wall. A sump pump, when installed in your basement, can be the most reliable defence against flooding since it will prevent excess groundwater from accumulating into a flood.

How Does a Sump Pump Work? When heavy rains pour, water that enters the basement will be collected by drainage tiles installed in the basement floor. This water will then enter the sump pit in which the sump pump is located. When the level of the water rises to a certain height, an automatic switching device will turn on the sump pump to start pumping out the excess water. The flood water will then be pumped away from the hose through a discharge pipe that is connected to the main sewage system located under your community streets. However, if the rise of the water is too fast for your sump pump to handle, then you may need to have another sump pump installed or have experts such as Toolkwip Pumps determine your flow rate requirements and suggest a more powerful pump for you. Flow rate or volume flow rate is the volume of liquid that a pump can move per amount of time. Flow rate can be measured in gallons per minute or GPM.

Types of Submersible Pumps. Sump pumps may be gas or electric powered. Submersible pumps that are electrically powered are more powerful than the gas-powered counterparts. However, during strong tropical cyclones or typhoons, your home’s electrical supply may not be one hundred per cent reliable and therefore, when there is a power failure, your sump pump may not work properly. In this case, you may have your electric powered submersible pump connected to an auxiliary power such as a generator set.

Remember, a flooded basement is usually caused by the continuous entry of small amounts of water into the basement. This type of flooding can easily be prevented by having a sump pump installed. However, when a natural flood disaster happens, your sump pump may not be able to handle the flood. If natural flooding does occur, you will need larger pumps from Toolkwip Pumps to help you remove the water from your basement.

Author Bio: Julian Carter is a farmer of words in the field of creativity. She is an experienced independent content writer with a demonstrated history of working in the writing and editing industry.  She is a multi-niche content chef who loves cooking new things.

 

Add Comment